DEPENDANT | Samara Parking Solutions

DEPENDANT (STACKING) CAR PARKING LIFTS

The compact design has suitable dimensions without the need for a manoeuvring area.
Interchangeable ramp & tyre stopper positions in both sides make lift use easier and universal.
Locations of the hydraulic power unit & electrical panel on both sides could be reversed.
The electrical panel has integrated dead-man pushbuttons (up, down & emergency).
There is usability in corridors and aisles to park the car on the platform without blocking the road.
It is possible to remove the steel base to free up the floor by fixing the post from the top & bottom anchor flanges.
Hydraulic cylinder inside the post carries the platform through carriage & chain lifting system.
Well-engineered lift design automatically engages safety lock latch at different heights when lifting up.
. Electromagnetic lock release is automatically activated during descending phase (down).
Platform runway is made of diamond steel plates and wave plates in the middle.
This lift is certified and authenticated according to European Standard BS EN 14010: 2003 +A1: 2009 & EN 1493:2010.
Steel parts are shot-blasted then powder-coated with desired color.

Dependent stack parking is designed to store two vehicles in the parking space of one.
Overhead power unit & electrical panel with outdoor cage provides quiet operation & safe usage.
The possibility to share posts for multiple connected units together saves the space and cost.
Two stage dual hydraulic cylinders are used to lift up the platform from both sides with chains balance system.
Automatic safety lock latches engage at several posts’ heights & electromagnetic lock release.
There are trouble-free high polymer polyethylene slide blocks; wear-resistant carriage bearings.
The lift uses maintenance-free self-lubricating balance chains’ rollers with U shape cover underneath the platform.
The lift uses Operation box with elegant Dead-man pushbuttons & On/off key-switch mounted on ergonomic arm.
Standard audible buzzer/ visual flasher descent alarm enhances safety during operation.
Wide-deck platform with galvanized wave plates accommodates pickups, vans and cars.
One-piece ramp made of diamond steel plate facilitates parking of sports cars.
This lift is certified and authenticated according to European Standard BS EN 14010: 2003 +A1: 2009 & EN 1493:2010.
Steel parts are shot-blasted then powder-coated with desired color.

The lift uses low- ceiling height indoor parking lift suitable to fit 2 low-profile vehicles in narrow garages.
There is a single-stage dual-cylinder lifting system with balance shaft.
It is suitable for open & closed garage as both electric panel and HPU are protected inside backside compartments.
Wide-deck platform with galvanized wave plates accommodates different Sedan cars.
There is adjustable platform angle to park different types of cars.
One-piece low-profile ramp made of diamond steel plate facilitates parking of sports cars.
It uses Automatic safety lock & electromagnetic lock release.
There is operation box with key-switch fixed on the arm for easy access.
Steel parts are shot-blasted then powder-coated with desired color.

Multiple-use parking lift helps double your space.
The lift uses hydraulic driven cylinder with steel ropes & sheaves lifting system.
Mechanical safety locks engage inside ladder locking holes, 100 mm pitch in all posts.
Spring loaded slack - cable safety locks will be activated in case of steel rope rupture.
We offer manual or electromagnetic lock release as per customer request.
The limit switch on post controls lifting height.
It uses high polymer polyethylene sliding blocks, wear-resistant.
Platform runway & ramps are made of diamond flat plates.
There are movable oil drip trays or galvanized steel plates in the middle.
Electrical panel has integrated dead-man pushbuttons (up, down & emergency).
11. Steel parts are shot-blasted then powder-coated with desired color

Hydraulic driven cylinder with wire rope lifting system through sheaves.
Double safety locks in each post: first is a one-piece adjustable safety lock ladder and the other will be activated automatically in case of steel wire rupture.
Foldable ramps are suitable for sport cars and occupy less space.
The automatic locking system of the latches inside ladders while electromagnetic lock released through a push button on the operation box.
Electric control panel and hydraulic power unit of external lift will be placed inside a compartment fixed to the back side of its platform
Tire stoppers on upper platform.
Steel parts are sandblasted then anti-corrosion primer painted and top finish with a color coat, or hot dipped galvanized for outdoor use.

It is a 4 post quad stacker (ground level+3 upper levels) for parking 4 cars over each other.
Posts are shared together to have multiple connected units for more strength.
There is a hydraulic lifting system through back mounted vertical cylinder connected with steel ropes & sheaves.
Automatic mechanical latch is connected to the cylinder to lock upper platform at every level.
There are several mechanical locks at every 150 mm interval in all posts to prevent falling & collision.
It offers simultaneous unlock feature for all platforms at all levels through manually operated handle.
Steel ropes failure mechanism helps lock platforms to avoid collision in case of emergency.
Hose burst/ rupture valve located at hydraulic cylinder helps prevent back flow of pressurized oil in the system after the valve.
The lift has limit switches, one at each level to stop platforms at predefined height.
Operation box with elegant dead-man pushbuttons (up, down & emergency) will be fixed on the front post.
It is suitable for all kind of Sedan/ SUV cars with max lifting capacity of 3 tons each.
Steel parts are shot-blasted then powder-coated with desired color.
It is possible to have intumescent fire-retardant coat for indoor application.