INDEPENDENT UNDERGROUND CAR PARKING LIFTS
UPS
-
Subterranean parking system inside concrete pit without prominent structure above ground level.
-
Hydraulic driven through vertical cylinders inside facility columns, oil tubes & different valves.
-
Customized dimensions according to site requirements, suitable for residential & commercial use.
-
Independent parking system with up to 2 hidden levels (2 cars) and top platform as driven through.
-
Mature design, well-tested product and easy for installation and maintenance.
-
Side supports of columns together with longitudinal & cross beams to keep the unity of the structure.
-
Chain anti-rupture devices to stop the system in case of chain rupture.
-
Fall arrest devices to be activated automatically at every level to stop platforms to ensure safety during parking/retrieving cars.
-
Driveway top platform is made of diamond steel plates while galvanized wave plates for lower platforms.
-
Limit switch in every level to stop platforms at predefined heights, IP 67.
-
Electric operation box is equipped with dead man pushbuttons, emergency stop and on/off key switch.
-
Electric Operation Box is operated with 24 V to protect against short circuit.
-
Hydraulic power unit preinstalled inside soundproofed compartment to be fixed under upper cross beam of the machine.
-
This lift is certified and authenticated according to European Standard BS EN 14010: 2003 +A1: 2009 & EN 1493:2010.
-
The standard finishing is hot dip galvanized but can be covered with powder coated too.
UNDERGROUND MOTOR DRIVEN PARKING SYSTEM
-
Underground independent parking system inside concrete pit without prominent structure above ground level.
-
Structure frame composed of 4 columns fixed to the wall & floor and two longitudinal beams (one connecting each 2 columns together).
-
Moving structure composed of multiple platforms connected with 4 carriages that slide vertically over fixed columns through guide rolling wheels.
-
Driving system with geared motor fixed under one longitudinal beam and transmission shaft with ball bearing fixed above the same beam.
-
The motor gear is connected with transmission shaft pinion through wide drive chain.
-
Customized dimensions for systems of 2 or 3 levels to fulfil requirement of any site.
-
Mechanical lock devices fixed on longitudinal beams to ensure safety of platforms at each level.
-
The upper platform made of diamond plates while galvanized wave plates used for lower platforms.
-
Electric sensors to confirm that there is no person or object before raising & lowering the platforms.
-
Electric operation box equipped with "dead man" pushbuttons, emergency stop and on/off key switch.
-
Electric Operation Box is operated with 24 V to protect the system against short circuit.
-
This lift is certified & authenticated according to European Standard BS EN 14010: 2003 +A1: 2009 & EN 1493:2010.
-
The standard finishing is hot dip galvanized but can be covered with powder coat too.
UNDERGROUND SCISSOR HYDRAULIC LIFT
-
Independent scissor lift for parking one hidden car and another one on upper platform.
-
Customized design with paved roof canopy to integrate with the surrounding architecture.
-
Hydraulic-driven system with 2/4 cylinders, oil tubes, and valves.
-
Manual oil drain valve to lower the scissor manually when power off.
-
Hydraulic cylinders equipped with hose rupture valves to prevent back flow of pressurized oil to the system protected by the valves.
-
One-piece base frame with U channels to guide sliding blocks/rollers, which facilitates the loading & offloading process.
-
Scissor base with arms will be placed together horizontally inside the container for easy loading/off-loading.
-
Both the upper and lower platforms consist of 2 pieces, which are easy to be fixed together by bolts.
-
Dual operation either by remote control and/ or operation box of "dead man" pushbuttons, emergency stop & on/off key switch.
-
Electric operation box equipped with "dead man" pushbuttons, emergency stop, and on/off key switch.
-
Electric Operation Box is operated with 24 V to protect the system against short circuit
-
Limit switch in every level to stop platforms at predefined heights, IP 67.
-
Anti-fall safety locking system to be activated automatically at each level. Electromagnetic lock release.
-
Upper platform is fixed to the floor drainage channel to collect rainwater and prevent likely flooding.
-
The standard finishing is hot dip galvanized but can be covered with powder coat too.
